Best Resin Wash and Cure Stations for 3D Printing Enthusiasts in 2026

Need to simplify post-processing for resin 3D prints? This guide highlights the best resin wash and cure stations to streamline cleanup and curing. Ideal for hobbyists and small studios, these devices save time, improve model quality, and help you handle larger prints efficiently. The top picks below are grouped by capacity, ease of use, and compatibility with popular printers like Photon, Mars, Saturn, and Mono series. Each option is evaluated for who it’s best for, and why it stands out in its class.

Summary Table — Selected Products

• ANYCUBIC Wash and Cure 3 — Large cleaning bucket, Gooseneck lights, dual-height basket for bigger prints.
• ELEGOO Mercury Plus V3.0 — High capacity, improved agitation, intuitive touch panel.
• ELEGOO Mercury Plus 2.0 — 360° curing with 16 UV LEDs, flexible washing modes.
• ANYCUBIC Wash and Cure 3 Plus — Expanded washing size, improved curing uniformity, flexible light.
• ELEGOO Upgraded Mercury Plus 3.0 — 7.5L capacity, 360° curing, user-friendly design.

ANYCUBIC Wash and Cure 3: Large, Flexible 2-in-1 Station

Check Price on Amazon

Best for: LCD resin printers up to 7.3 inches, plus users who need more IPA capacity. This model expands the cleaning bucket to 4L and increases the basket capacity by about 42% compared with earlier versions. The design accommodates build plates from 5.9 to 7.3 inches in height using dual adjustable baskets at 100 mm and 165 mm. Clean efficiency is boosted by a Gooseneck light that concentrates UV energy on delicate areas, improving detail on overhangs and fine textures.

Why selected: Larger volume and enhanced curing focus help with bigger prints and stubborn geometry. The dual-layer PP basket supports different platforms, reducing transfers between prints and saving IPA.

Limitations: The larger footprint may require more desk space, and IPA consumption can vary with print height. Ensure your workspace can accommodate the slightly taller unit when open for use.

ELEGOO Mercury Plus V3.0: Big Capacity With Easy UI

Check Price on Amazon

Best for: Users who want a straightforward, high-capacity wash-and-cure solution with simple, quick operation. The 7.5 L cleaning capacity is 2.1 times larger than V2.0, and curing size is expanded for handling larger models in a single session. The upgraded POM bearing improves agitation for thorough cleaning, while a light panel helps you tailor wash and cure durations up to 30 minutes.

Why selected: Strong balance of capacity and usability; ideal for busy makers handling multiple large parts or mixed-priority projects in a single session. The single-panel UX makes setup predictable for new users.

Limitations: Slightly heavier and larger; may require more electrical outlets and a stable surface for access to the touch panel during operation.

ELEGOO Mercury Plus 2.0: Intelligent Curing And Washing

Check Price on Amazon

Best for: Printers needing quiet operation and flexible washing options. Mercury Plus 2.0 features a sealed wash mode to minimize resin volatilization and a fan-less curing mode that keeps noise minimal. The integrated 405 nm UV LED array and 360-degree turntable ensure uniform curing, while a height-adjustable platform accommodates varying bath levels.

Why selected: The combination of sealed washing and quiet curing is ideal for home studios or apartments where noise and odors matter. The adjustable platform helps fit different build plates without compromising performance.

Limitations: The unit relies on a consistent resin workflow; ensure you keep the UV lid in place to protect eyes when not in use.

ANYCUBIC Wash And Cure 3 Plus: Volume and Uniformity Upgraded

Check Price on Amazon

Best for: Experienced users needing bigger wash capacity and better curing uniformity across larger prints. The basket volume increases to around 7.6 L, and the washing size expands to accommodate larger LCD displays and print beds. The Flexicure Gooseneck Light adds targeted illumination for tricky areas like top surfaces and skirts.

Why selected: This model combines a larger wash area with a refined curing layout, delivering more consistent results for complex geometries or batch processing of multiple prints.

Limitations: The enhanced features come with a higher price point and a larger footprint; plan your workspace accordingly.

ELEGOO Upgraded Mercury Plus 3.0: All-In-One Post-Processing

Check Price on Amazon

Best for: Users who want a thoroughly redesigned 3.0 experience with 7.5 L washing capacity and a ∅ 250 mm x 290 mm curing area. This model highlights 360° all-around UV curing via 24 UV LEDs and a rotating turntable plus reflective base for even hardening from every angle.

Why selected: It offers a robust, user-friendly workflow that reduces post-processing time while maintaining consistent results for larger or multiple parts. The high-capacity bath and comprehensive curing system are well-suited for frequent production runs.

Limitations: Larger unit with a complex setup; ensure you have adequate space and proper electrical support in your workspace.

Buying Guide: Key Considerations For Resin Wash And Cure Stations

• Capacity and size: Choose a unit that fits your typical print bed dimensions and the number of prints you post-process in one session. Larger models speed batch processing but require more workspace.
• Cleaning mechanism: Look for strong agitation and a reliable, smooth-running basket or rack. A dual-height basket helps accommodate different platform heights.
• UV curing performance: Consider the curing area size, LED wavelength (commonly 405 nm), and whether the device uses a rotating turntable for uniform exposure.
• Light quality and targeting: Gooseneck or Flexicure lighting improves curing precision on fine features and surfaces like skirts and top faces.
• Waste and safety: A sealed wash option reduces resin fumes and IPA volatilization. Ensure proper ventilation and storage for IPA.
• Ease of use: Clear displays, intuitive controls, and preset modes save time and minimize guesswork during post-processing.
• Compatibility: Verify compatibility with your printer models and resin types, especially if you use printer brands beyond Photon/Mono or Mars/Saturn lines.

FAQ

1. What is the main advantage of an all-in-one wash and cure station?
   It streamlines post-processing by combining cleaning and curing into a single workflow, reducing handling and improving consistency of cures across prints.
2. How do I choose the right capacity for my needs?
   Consider the largest model you print and how many parts you post-process per session. If you regularly post-process multiple large prints, a 7 L+ capacity is beneficial.
3. Is UV curing safe for home use?
   Use the built-in UV shielding and avoid direct eye exposure. Ensure the unit is placed in a well-ventilated area and follow the manufacturer’s safety guidance.
4. Can I use any resin with these stations?
   Most stations are designed for standard 405 nm resins. Always check the device’s compatibility notes for specific resin types and post-processing requirements.
5. Do these stations save IPA?
   Some models offer adjustable basket heights to minimize IPA use, and double-layer baskets help separate cleaned parts from the wash bath, aiding solvent efficiency.
6. What maintenance is required?
   Regularly replace cleaning baskets if worn, monitor IPA levels, and clean the turntable or agitator to avoid debris buildup.